Chamma support: Button 6 for players 1 and 2 are placed on Jamma pin 27 and pin e. This JAMMA extension is often used in 6 Buttons Arcade Cab. The Chamma support can be switched on and off. <\/span><\/li>\r\n
CPS2 kick harness interface. Many Candy Cabs support this interface for Button 4, 5, 6 Player 1 and Player 2 <\/span><\/li>\r\n
Extra pin header interface for video signals: External image converters or similar can be connected here. <\/span><\/li>\r\n
Extra pin header interface for all free GPIO pins of the Raspberry Pi <\/span><\/li>\r\n
Support of the switch signal can be switched on and off<\/span><\/li>\r\n
\r\n
Native 15 kHz video output<\/div>\r\n<\/li>\r\n
\r\n
Direct lagless controls<\/div>\r\n<\/li>\r\n
\r\n
Sound amplifier with volume control<\/div>\r\n<\/li>\r\n
\r\n
Video amplifier for great colors<\/div>\r\n<\/li>\r\n
\r\n
6 Button Support for each player<\/div>\r\n<\/li>\r\n
\r\n
Jamma interface<\/div>\r\n<\/li>\r\n
\r\n
Support for all Raspberry Pi Versions with 40 GPIO pins<\/div>\r\n<\/li>\r\n
\r\n
Adapter includes audio cable<\/div>\r\n<\/li>\r\n<\/ul>\r\n
Note: You will need to source your own Raspberry PI, 16 GB SD card and USB stick.<\/div>\r\n